All posts where Boostlee has mentioned other members
Koni 8611-race question (custom housings and fitment question). Help
Koni 8611-race question (custom housings and fitment question). Help
Koni 8611-race question (custom housings and fitment question). Help
Keo if you make your way up to JK (read: finish your P11), I'm taking a day off work.............And taking a trip on one of those flying pigs which will suddenly be abundant :D
OBD-1 G20 ecus are also compatible if my memory serves me correctly from what John told me the last time I was down there. I think it was something along the lines of how many outputs the ecu had.
...
Storm88000: Use Rotella "T" 15W-40 for the turbo vehicles (held up well on my last trackday. About 1.5 hrs of track time on a T3 turbo @ 10-12lbs with a good amount of flogging!)
Its less than $20...
M0J0 As I said I "heard" it can be implemented but never could be bothered ;)
Vadim and myself had a discussion about this a few months back ;)
To me, the Calum is seemingly outdated as JK is...
M0J0 As I said I "heard" it can be implemented but never could be bothered ;)
Vadim and myself had a discussion about this a few months back ;)
To me, the Calum is seemingly outdated as JK is...
Ninja EDIT if you missed it BenFenner ;)
^^ The only way it will be applicable is if you know what TP on the x scale of the Nissan ECU correlates to on a MAP based Honda system...........
In order words, 5speed is correct, almost usele...
Try GregV
He is very good at getting things to customers stat!
Thanks for the response guys! Turns out I may give it a shot if the correct coupler comes my way. That or modify the housing to fit the N62 MAF.
Vadim, I will be down i the VA beach area some ti...
^^^ duesmandella
Sure
Hankook*Ventus R-S3 225-45-15
They come in 225-45-50 option
Also
[url= URL=http://www.discountedwheelwarehouse.com/Discount_Tires.cfm?pn=Toyo-160680&pID=9486]Toyo R888 2...
coach, I did this last night on the passenger side. One thing to note: on the P11, you will have square lock washers which prevent the Inner Rod from "walking off' the rack itself. I heard of them ...
coach, I did this last night on the passenger side. One thing to note: on the P11, you will have square lock washers which prevent the Inner Rod from "walking off' the rack itself. I heard of them ...
coach, cortrim1 what bolts did you end up using??
I do know the studs are M 10x1.25 with circa 38mm length and the bolts are M10x1.25. Is this correct??
Also, I checked around for the ARP var...
coach, cortrim1 what bolts did you end up using??
I do know the studs are M 10x1.25 with circa 38mm length and the bolts are M10x1.25. Is this correct??
Also, I checked around for the ARP var...
coach, cortrim1 what bolts did you end up using??
I do know the studs are M 10x1.25 with circa 38mm length and the bolts are M10x1.25. Is this correct??
Also, I checked around for the ARP var...
Keo
Ok Vadim, as requested. Sorry for the delay, I ran out of work Friday before taking pics (where I left the Moogs).
Outer thread length - 2.172 inches / 55.1688 mm
http://i15.photobucket.com/a...
Vadim, once I get all sorted I will grab the rest of the pics today :)
Vadim, I will take care of that when I get to work tomorrow!
Thanks Keo!
^^ That brings up another question ashtonsser (and 5speed)
How do you go about removing the Axle for the carrier while on the vehicle?? I have took Vadim's and Keo's advice and know how to remov...