skydiver's Posts

...well, I agree.
Cam timing was changed , but not by me, so not sure what is the current setup.
Waiting for the edited bin, once i have - I'll post it here.
And thanks for offering your help,Ha...

Yes, the distributor is set to 15*.
The old timing map, with 0/0 in/ex on the cams gears:
http://i.imgur.com/cZWsAVr.jpg
The car doesn't respond to more advance.
It'll be edited very soon.

Still no videos, but the car is running on stock intake , tube and airbox, due to limited budged...
Yesterday we installed 2,5 inch exhaust (I was insisting for 3 inch, but without results...) :
...

Long time no update.
I'm thinking about a pulsar ITBs on my VE engine...
I've searched a lot ,but all the info is about other vendors ITBs, and short comments that pulsar ITBS sucks.
Have anyone te...

First run on 370cc injectors, no fine tuning :
https://vid.me/NyF1

I've the feeling we'll go maybe over the 200hp on the crank...

P.S. : it started on a 1/2 revolution from the starter, i'm amaze...

BC have both layouts - for VTC and non VTC head.
Engine is ready for ignition.
Current setup :
SR20DE high port engine
BC cams stage 3
adjustable cam gears
ВC springs and titanium retai...

I would add only that top feed injectors are not working so good over 85% duty cycle as the side feed.
Side feed are "cooled" from the fuel ,from my understanding , as I have seen them working on ...

Thanks to jagy - SR16VE pistons delivered.

Cams (BC0206), springs and retainers (BC0200) ordered.
Waiting for delivery.

Thanks, the project is not mine, I'm just helping a friend, who knows few languages , but not English...
I'll talk to him.

Thanks Haulin200sx!
Will keep the topic up to date.

Thanks, Haulin200sx!
"Go big or go home!" - that is our goal :) !
Can you share the timing of the cams - intake/exhaust (+/-).
It'll help me a lot and save a lot of time.
You can PM me, if you ...

New project - Feedback for Brian Crower stage 3- 272* needed

Great, Pm sent.

Do you ship to UK ?

That is my idea,thanks!

...one very old topic, excuses for bumping this up, but I have the SR16VE engine, SR20"stroker kit", the SR16VE ECU and the 370cc injectors...
Does anyone has an idea about the AFR ratio of this "s...

Glad to hear it too!
Hope you'll find your seats from a real seller and get them as expected!

No, just happy for what is done here, in my country and in Romania.
We are big Nissan fans around here and I wanted to share this with you.
I'm sure Williams' car can make better run on well prepar...

Only FYI, 8,8s /256 km/h one European Pulsar, build in Romania, by Exelixis Motorsport :
https://www.youtube.com/watch?v=N1FyNlmWmGk

Impressive!

Bought SR20VE valve springs, retainers and seats.
You get what you paid for, well packaged!
Thanks, Andreas.

Hi mate,
This one of the few good P11 GTs left around here (I mean in Bulgaria ).

Autech spoiler is awesome!
Respect, very good car you have there!

And what about SR16VE pistons in stock SR20DE RR engine?
Are there any modification needed - skimming the piston , any timing retard ?
The pistons will be dropped in a stock engine, with no othe...