All posts where Boostlee has mentioned other members
gomba, as mentioned, everything happens behind the scenes so you have to know the right folks to talk to. I have posted several threads on here and got responses in a few hours.
But you also have...
Storm88000 you went as far as quoting my post but NOT reading a single portion of it??
:cry:
Actually it looks like I figured it out
The TPS Sensor Data is off as it was not reading 100% TPS. Went into the fils, and for the section of runs compared in my log, I changed them to 100% TPS an...
Actually it looks like I figured it out
The TPS Sensor Data is off as it was not reading 100% TPS. Went into the fils, and for the section of runs compared in my log, I changed them to 100% TPS an...
JKTUNING
John, will this [url= URL=http://www.diyautotune.com/catalog/gm-open-element-iat-sensor-with-pigtail-p-62.html]GM Open Element IAT from DIY-AUTO[/url] sensor work??
That car has (unfortunately) been through several hands since Mike and every time each owner has slowly destroyed the car more and more each time :(
Ohh and shout out to BenFenner too as he may also know a thing or two :)
P.S. Almost forgot listen to wnwright. He may know a thing or two :)
eggman, do not look at heat ceiling and focus more on the pad compound and initial bite vs temperature characteristics. Most autox pads make great street pads as they have huge initial bite with lo...
Try and send celm a PM! I know he circulates forums like Zilvia, but not certain if he is on here much
I read 100/pr as a [size= SIZE=5]100 PER ROTOR[/size] :poke:
:D
To me, 100 per rotor for a stock piece IS expensive ([size= SIZE=5]IF[/size] it were the price)........BUT that is MY opinion :poke:
eggman
I ran the cheapo rotors as
1) The car weighs 2600 or so lbs
2) In order for me to run the rotors I like (that won't crack like 99% of the cross drilled rotors for our cars) it was not g...
hammerin hank I think you are missing the point (and a very good one at that)
Race pads are a big NO NO for any sort of street/daily driving as you will NEVER get the heat into them before they be...
Abdielo
As I mentioned before (and hence why I asked if you have access to a set of blown coilovers), if you have the right housings from certain coilovers NO cutting is required...........AND th...
Depends on the temperature.
For the colder months of the year, I run 10W30, and for the warmer months/HPDE I run 20w50.
As mentioned earlier you have a oil feed issue
C-Lawless Did you not buy n...
hammerin hank, to me, it seems fairly easy and straightforward (but I have also done my fair share of legwork and measurements). I could put a set of these in my housings and bolted up the my car i...
LOL! Sourcing "new" parts now ;)
Just gotta do a bit of leg work. The setup was bought "used" as it is being used as a development set for my own personal use. The front end is getting all new...
Vadim, let me know what you want to do with 2J as I will ante up for the conversion. They were actually at the first Summit Point event I went to at the beginning of March and I have a feeling I wi...
Keo Pmd
Whats up with the ninja edit Kyle?? Care to inform (be it here or through pm)??
Keo, wnwright, coach, any recommendations on where to get it rebuilt?? I do know of the popular Koni, Truechoice and Proparts, but according to alot of testimonies, they have a very hard time keepi...
Keo, wnwright, coach, any recommendations on where to get it rebuilt?? I do know of the popular Koni, Truechoice and Proparts, but according to alot of testimonies, they have a very hard time keepi...
Keo, wnwright, coach, any recommendations on where to get it rebuilt?? I do know of the popular Koni, Truechoice and Proparts, but according to alot of testimonies, they have a very hard time keepi...
Koni 8611-race question (custom housings and fitment question). Help
Koni 8611-race question (custom housings and fitment question). Help
Koni 8611-race question (custom housings and fitment question). Help