Coheed's Posts

If you can fit the GTIR bearings then I would go with ACL, though they are a bit pricey. If you can't fit the bigger bearings, stick with the stock size. It really isn't worth the extra money for t...

This is something that will just depend on the car and the pump. I have seen personally B14 pumps fail at 180whp. But I have also seen pumps handle over 250whp stock. It really is going to depend m...

Correct. The inside diameter of the pickup tubes is different, but they should mount up all the same.

The GTiR and VE pickup tubes are physically larger to allow more flow.

This is what I know about the pumps. The GTiR and VE pump are very similar, but the VE pump has some improvements to the design to increase flow. The GTiR and VE both have the same spacer, and the ...

If you have NX calipers, then order brakes for a 91 EAGLE TALON OR MITSU ECLIPSE GSX. They use the same AD22 Brake calipers. This will save you from the parts-confusion and can possibly save your l...

So the SR16VE cams are good to 8500 on my sr16VE head? This is 500rpm more than stock on a 16VE right?

I would like 9000rpm window for overrev without damage, but I don't wanna find out the hard...

A koyo, and electric pump. I think 1 fan should do just fine. A koyo with one fan generally does just fine with the stock water pump.

Give it a try. If you start to overheat, add another fan. B...

If you go to Autozone they have the new water pumps that all look like the VE pump. I have one on my car now and it has done me very proud. Looks and performs just like the factory one.

Be caref...

This setup will work flawlessly Vadim. You could also put an oil catch can in line with the clear hose from the T to the intake. Make sure the catch has a proper baffle system in there, and you can...

I am currently having a manifold done so hopefully that is done by the 22nd so I can get the testing done for that. After the manifold and turbo get put back on she will be ready for some serious d...

The N1 springs are not as strong as the standard springs. At least that is what I had thought.

The N1 ramp angle is very very smooth.

I would like to see how they do just for kicks. The SR16 ...

http://i38.photobucket.com/albums/e116/jpsr20det/dynos/3rgeartunedvs4gearuntunedp11ve-t.jpg

http://i38.photobucket.com/albums/e116/jpsr20det/dynos/p11turbovetsr16camsat16lbs.jpg

It looks like...

Bringing this back from the dead, but I was wondering if I had a set of the 20V/N1 cams in my setup with the new manifold, how would the car react to revving to 9000 rpm?

I am just throwing some...

Really? Hrm, that kinda sucks if so. I wonder how the N1 cams will look. Snickers has said they peak way way late, like 8500rpm or so. I would like to see because right now JP is peaking pretty ear...

If I can get ahold of the 20V low/N1 highs I would love to do some testing on them. Drop in test vs these VET cams and sr20Ve cams on my turbo VE.

If I could see results like this from my car with a broad powerband up to 8000-8500rpm or so I would love it. It would be rediculous, but this turbo prob wont do more than 475whp up at my altitude....

Comparison of the 20ve cams and 16ve cams on same boost.

http://i38.photobucket.com/albums/e116/jpsr20det/dynos/p11turbovetsr16camsat16lbs.jpg
http://i38.photobucket.com/albums/e116/jpsr20det/d...

I would like to see the VET cams and the N1 and the 20V cams please :)

JP is my testing hero, what do I owe you for all this info?

Well, a new development today. I sent off the turbo to ATP because my guy is too slow getting ahold of stuff. ATP quoted me $450 via Email but when I called today I talked to a rep that said it wou...

mmmm drinking.

I just want a good turbo cam with the broadest powerband I can get.

For all the nonbelievers. HAHAHA

Lucas Octane Booster Test. One Tank One Bottle

NOS Octane Booster Test. Jet Fuel

Yes, the octane booster CAN give you 40 points. 40 full points (4 full oct...

Dayum. Ya I have wanted to try out the VET cams on a bigger setup. They have much better engine response than my old 20ve cams did. I will have some results on my particular setup soon, but I hones...

I'm gunnin' for you ashton! lol just playing. It seems so far off before my car is back on the road. Glad you are making good power, more than I made with the VET. I am hoping to be more competitiv...

This is what I got back from my vendor for this turbo CHRA replacement. But I have one more guy who says he can get the unit EVEN CHEAPER! I am going to hold and see what he says, then I will let y...