Coheed's Posts

I wanna see the flow stack. I bet it works :)

WOW yea, .85 is way too big. Nothing will fire that lol.

.044" is standard iirc. That would be 1.1 mm.

^^^^^

Well at least the backfires won't "sound" as loud right? RIGHT? HAHAHAHAHAHAHA.

So 150kmph is about 100mph. That really sucks, and is scary to see the damage from that speed! I nail 100mph getting on the *cough* track all the time. Easily.

That is pretty brutal, it sucks to...

I would just throw on the DE spacer and use the UD pullies. They should work.

I have a spacer just chillin here you can have just pay shipping. It is the DE spacer which should be used for the DE pulleys.

DE spacer=DE pulley

VE spacer=VE pulley

If my memory serves ...

Check the basics. Sounds like it just flooded out to me. If the plugs were wet then that is def the case. Clean the out, air it out, then try again.

Also fix all boost leaks.

Man when is the ddynnnooooo?

I'm to anxious to wait!

The 98-99 motors have no oil squirters. Not sure about the RR though, I have one laying around here I just haven't torn apart yet.

I have 8.5:1 pistons and I don't notice any decrease in bottom end power since I had 9.3:1.

You are running SR16 gearbox! holy moly. It will probably spin tires all the way through 4th lol.

Can't wait for more updates.

a res with a disco is all you will need. It will be reasonably quiet. Very fun. 3" is the ONLY way to go when in the neighborhood of 300whp. It helps spool a lot.

I'd be willing to donate my car for some shop time ;) It's already got a VE in it lol.

http://orlandoech.com/login/bj/images/IMG_2119.jpg

Manifold is getting done in about two weeks. The time is soon!

Wait a sec, it is a real Xtrail VET motor? Did you change the rockers on the exhaust to the ones for lift? Pretty sure you did. If not, then running the stock SR20VE cams would be pointless because...

I would relate the real VVTLi to more of the performance iVtec. It has a hydraulic intake with variable intake cam timing, along with lift. It just doesn't have it on the exhaust side like the Hond...

Only newer honda motors have VVT as well and variable lift. To me, variable timing is something that can change over many different ranges of the rpm band. simply changing one static timing event d...

197 kilowatts = 264.181352 HP

When you do the test for the stocker cams let me know. I wanna see how it reacts. You will prob be done testing before I will ;)

dude!
Sweet!

Can't wait till you are finished man. This looks really good!

The SR16 head with SR20ve cams is essentially an SR20Ve head. There won't be any issues.

Ah, the SAFC! I may just do that!

I live in Utah, where you must have an OBD2 test done. They plug into the port and check for codes, and readiness monitors to ensure compliance. If the light is...

I believe this radiator is the same one as made by Proliance. I have a proliance in my car right now. It has the same core thickness and a much higher fin count than the NX does. The inlet and outl...

They are different parts. The knuckle is the part that bolts to the strut. The spindle is the piece that the wheel studs are attached to.

Look around for a good used knuckle with the hub attache...

I found lots of places online selling for around $1.80 or so. I will see if the stealership can hook me up. I have some harley connections.

The smell may go away eventually, but it won't hold NO2.

You need a stronger clutch.