Just thought I throw in if your doing a gtir you shuold change out the purple plug cylinder with a usdm one so you get a direct connection. And also you have to swap the outside wires on the tps, w...
Show me where i can get GTi-R 12mm head studs for 210???????? The de ones yes, but not the gtir? Please show me where I can get these for a GTi-R for 200 dollars......PLEASE!
That doesn't confirm anything. Show me a measurement of a 91 highport cam and and 10:1 cam, then I will believe it. I drove around in a 10:1 car and it didn't feel any different then my 178k mile ...
Is there any proof of this? I mean a 10:1 motor is suppose to be 150hp right? And the 9.5:1 one is 140 so doesn't the high compression give the extra 10 crank hp? I doubt the 10:1 intake cam is any...
A few people told me this has happen to them. I though with the solid lifter a and all the head could handle 8k, but I guess the head isn't as strong as I thought. I set my rev limiter to 8k, but i...
Are you doing the pistons or just running plain old 9.5 pistons? If you run those 16ve pistons with cams then you should easily be able to hit your goal.
I think it came from over revving it. I think I was hiting 8200k at times, so that would explain. My oil pressure was 22psi at idle and 40-60+ when accelerating when warmed up, so that was also fine.
Thanks for the rocker arm and spring. If something happens and you can't find it or send it please let me know and i'll buy one.I will pm you my address now. Thankyou very much.
Well here is the real problem and the pics. It was a snapped rocker arm in under the valve cover. I am hoping thats all thats wrong. Is there any chance thats all that could have happen or could mo...
I am just going off of miko's words and if the car car make 190whp is should be able to take out alot of ve plain and simple. most ve;s I see are only making 175-180whp on average.
Who really cares??? I mean to be honest I am just trying to extract as much hp as i can out of a de without making it undriveable. Comparing prices mean squat. And besides you know a ve build will ...
Where can i get the header? manifold? and what is the JWT CM6(just found out there some nasty cams that take away ALL daily driveability)?? If this was all done though there would be NO daily drive...
Nice:bigthumbup: I really hope so. The only thing its really missing is a ecu! Its currently running a stock de ecu, so I think if I add a daughter board and have my buddy tune this sucker I can de...
Sounds good to me. I just have to add the better oil pump and the rr lifters. Although I am positive it already has a 8 counterweight crank, but oh well.
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top