Precision uses a ceramic ball bearing setup that doesn't require water. It still kinda makes me nervous though, because I love to drive hard, and I'm not always patient enough for a full cooldown p...
400whp on 10psi would be insane. I would be way happy if it did that. I don't know if it will make it, but I gotta say that number would be awesome for wastegate spring pressure.
My program is 3 bar, so I am going to watch the AFR on the dyno and see where it comes out at. Wherever I make 500-510whp is where I will stop. Hopefully I can hit that on 20psi, but I am thinking ...
Ok, well the turbo is officially bolted on. Oil lines are hooked up, and it is bolted to the manifold. I deleted the coolant lines which took all of 2 min. And now I have to re-think my intercooler...
did you have to modify it? When I talked to precision they said they don't offer the 3 5/8" in the T3 flanged turbos, and they list the Vband in/out housings at 3" as well. The flange they design f...
I talked to the dealer and they said that the 3" is what I have. They just measure from the OD of the flange. Not the ID like the garretts. They call the T4 turbos a 3 5/8" V band, which is really ...
After much reading, it turns out that this is the only one Precision makes. They have a specific Vband that works with a 3" dp too. But the T4 turbos are the only ones with the "true" 3" vband.
Well I got the turbo on... sort of. the intercooler piping needs to be re-routed. The coolant lines still need to be deleted. And the downpipe needs to be re-flanged.
The new turbo has arrived! Going to put it on tomorrow, and dyno as soon as I can. Going to leave the cam gears where they are for now. Then, I will change the timing and dyno again to see the gain...
I don't know yet if it comes with a restrictor or not. I planned on taking my restrictor out and running it open to see if it smokes or not. I think the return is large enough and the drain is stra...