Seems like there are a ton of those ones out there though. can't seem to find the clear headlights. I found some black housing ones, but they don't have a reflector in the turn signal housing and w...
That's ok. I've been told 740cc injectors run up to 500whp, but mine showed 104% duty cycle on datascan when I was making ~480whp. Granted I'm revving to 8800rpm, but the motor never leaned out. Th...
R12 is getting so damn expensive. Hell, with them shutting down R134a plants worldwide, you can expect prices to get pretty ridiculous in the next couple months. 134a 30lb cans are going to be goin...
BTW, the aluminum on the radiator doesn't look like it rubbed through exactly. But it looks melted. Maybe it just barely touched for long enough it polished its way through it.
Well, I measured it out, and it looks like I will have about 15-16" of radiator height to play with before it hits the hood. That is from using the mounts for the condenser. It actually looks like ...
I'm running a A/W intercooler. I have tons of room up front for a nice radiator. But for the sake of keeping things as simple as possible, I may end up using the factory Koyo or Mish radiator.
That is exactly what I was thinking myself actually. I am planning on getting something serious, but I just want to get something with the right size 1 3/8 hose inlet and outlet to make things easi...
Well, the civic radiator is not likely to be a good idea for the track. Maybe 1/4 mile runs, but the overall capacity wouldn't do it for track days in 100* heat with high boost. I'm almost positive...
Well, it looks like the axles are a nissan hybrid that they used in some year of Spec. That's why some SER axle outer joints fit on the Spec shafts. I am thinking the 2002 Spec V axles are the ones...
A turbo blanket will help with the turbine, and the manifold is wrapped. But I need to upgrade the radiator to a larger one for better cooling capacity. But the manifold is...
I took the car for a mountain run today. Decided to see how it does in the corners. Granted the front tires aren't the best, and I don't have a front roll bar. The car did phenomenally well. It rea...
The race for the diff will come out by tapping it from the other side of the oil seal iirc. The mainshaft bearing should be on the shaft. I think a snap ring holds it on. You have pics?