Coheed's Posts

the bearings can not work from the b14 to b15 unfortunately. the bearing width is different, the b15 is a wider bearing and wont fit in the knuckle from the b14 correctly. :(

I think the ultimate ...

The knuckle is designed for different brakes is the problem. I don't know if the b15 knuckle can use the b14/b13 brake setup. If it can, then it will save us all a lot of money. But if it can't, we...

the acl bearings are a trimetal bearing. They contain more lead than most brands anymore. But they wear a little faster.

Stock manifolds will outperform this.

I'm thinking some metal was left inside the block which contaminated the new bearings. Either that, or the block itself had some blockage feeding the crankshaft. Hopefully you get it all figured ou...

Car weighs 2680lbs. Just remember, I haven't had a good set of slicks on the car yet at the strip. And I don't have any launch control either. Not to mention the track prep up here isn't the best.

I've made tons of progress on this. The car is ready to roll out but just needs axles, wheels, and brakes. I am having a hard time deciding which brakes to go with. Is 12" big enough for 500whp?

B...

Yes, clutch is a 240sx clutch.

I am converting the car to Spec V underpinnings. Including all hubs, brakes, and rear beam.

I've spent too much money with you Greg. I'll continue to do so. You're the best!

I think I can find some stock Brembo from the spec V for pretty good price. They seem to do okay and I think they will stop the car pretty well. This car seems to get more bastardized each year, bu...

Bottom line, I still love smacking local hondas and exotics in my sentra. Regardless of resale value. :D

Get a B15/P11 trans, keep a sprung clutch, and run heavy shockproof. Your p11 will last a lot longer if you do this. Few people have blown up as many as I have, so you have to just do it right so y...

400lb ft of torque breaks things. I think weight is a big issue. Im running a 4dr SEL at 2680lbs.

Could be sprung clutch too, but I've broken transmissions on sprung as well. Rolling on throttl...

take the tob and spin it on the ground. I always thought that the off-center caused a lot of the clutch adjustment issues ppl have. I could be wrong, but I prefer to use one that doesn't suck. Mine...

you've gotta use heavy shockproof in your tranny. Seriously it will last 5x longer.

man I could prob go wider, but its hard to find wheels wider that are available in a style I like. I may just go with some 215-45r17 because they are cheaper and I burn through tires really quick a...

So I am looking at buying these wheels. NISMO RAYS GRAM LIGHTS 57C 17x7.5 +47 4x114.3 WHEELS 17 - eBay (item 200535740561 end time Nov-24-10 08:18:01 PST)

And these tires.
BFGoodrich g-Force Spor...

how did they break gears?
I think they are feeding you some, because the gear stacks are very well supported. Likely they just broke the case to pieces, but who knows when you drop 40ft lol. Tell t...

I love the rotella. Best stuff I've used so far, and great bang for the buck. I use the synth 5w40.

Don't ever use the mobil 5w30 or 10w30. I've seen more ppl spin rod bearings on that oil than an...

don't use the nissan filters. They are hot-glued-together POS filters nowadays. Champion Lab filters are the best as far as pressure drop goes. So Mobil and K&N FTW.

I keep hearing good things ab...

it won't. The bearings would work...sorta. But long story short, the SpecV knuckle will not support the B13/b14 spindle piece.

I'd like to hear others' opinions as well.

Got the flywheel. Looks awesome greg! Told you i'd buy one ;)

ya, for the p10 no mod is necessary to the axles.

But a B14 comes with a crap setup, so smaller everything. Jeez. I may end up doing a lot of extra work if I can't get an axle solution.

Good news...

link me to the one you got. Just want to make sure I get the right one.

still need to figure out axles.